Flex Serisi Scroll Kompresösrlü Soğurma Grubu ve Isı Pompası

High energy performances are guaranteed by the HSC Hybrid Smart Cooling system, covered by an international patent. Over certain temperature values, watercooling is added to the air condensation. Electric consumption remains the same, whereas the power provided by the cooling unit increases up to 30%, respecting perfectly the plant requirements. They have other exceptional advantages such as the refrigerant load charge reduction and a better corrosion resistance.

Unit description

• Scroll compressors.

• ECO-PROFILE axial fans statically and dynamically balanced.

• Water side plate heat exchanger with differential pressure switch and antifreeze protection electric heater.

• Air side heat exchanger high efficiency finned coils with seamless copper tubes expanded into corrugated aluminium.

• Condensing and evaporating pressure control with variable fans speed modulation.

• Microprocessor-based controller.

• Thermostatic expansion valve.

• Casing and panels in galvanised and painted steel.

Mounted Accessories 

• Hybrid smart cooling® (2 way modulating valve, brazed heat exchanger).

• Low outdoor water temperature kit from -6 up to -10°C.

• Low outdoor water temperature kit below -10°C.

• Remote adjustable set point. (1)

• Electronic expansion valve.

• Power factor correction to cos phi 0,91. (2)

• Automatic circuit breakers for compressors.

• Automatic circuit breakers for fans.

• Over/under voltage + phase failure protection relay.

• Condensing control with variable fan speed modulation.

• Full inverter electronic fans.

• Soft starter.

• Low outdoor temperature kit up to -20°C (in cooling mode only).

• Compressors sound jackets.

• Pre painted condensing coils.

• Epoxy coated condensing coils fins.

• Copper/copper condensing coils.

• BLYGOLD condensing coils.

• Gas gauges.

• Anti intrusion grilles.

Loose Accessories

• Kit GENIUS. (3)

• Remote Display.

• Signal amplification card (distances more than 50 m).

• Liquid receivers (on condensing units).

• Connection valve kit (on condensing units).

• Flow switch.

• Automatic water filling.

• Water gauges.

• Rubber antivibration mounts.

• Spring antivibration mounts.

• Water strainer.

• Serial communication card RS485. (4)

• System management software through PC in Windows ambient.